Thanks
↧
New Post: New feature to store/recall pitch/speed settings for songs OR new semitone slider that adjusts in clear audible steps
↧
Updated Wiki: Documentation
Display
Press CTRL + O to Open URL dialogPress CTRL + D to Open folder dialog
Broadcast
With Impulse Media Player you can broadcast your music or record device over the net.To do so, you have two kind of server to choice:
- Windows Media
- Shoutcast
While WMA does not require any additional file, streaming in Shoutcast need two separate softwares.
- lame.exe ( can be downloaded at rarewares )
- a shoutcast server ( check shoutcast.com )
For lame.exe, just put it in the Impulse Media Player root directory.
To set up and run shoutcast server, you can take a look to the getting started guide.
By the way, here's an hint to run a shoutcast server using a simple configuration.
- Go inside Shoutcast program directory, open the scservsimple.conf file
go to the line
publicserver=always, comment using ; token and replace with
publicserver=never
add the following line:
portbase=8005.
since default port is often busy , using this port you have more chances to connect in.
Once you have updated the conf file, just run scserv.exe_ as admin and start it using simple configuration.
If you have success, you'll able to connect to shoutcast and spread your music over the network !
Broadcast with shoutcast
shoutcast web panel
Scrobbling
Scrobbling a track means you are sending to LastFM the info about the song you are listening.For more info, you can read the official FAQ page
This is a social feature that also allow you to know people which same music's interest.
To scrobble a track you need to register an account to LastFM and then give to Impulse Media Player the right permission.
To do so , open the preferences dialog, go to LastFM section and follow the simple steps indicated by the display. By clicking "Next button", once you are logged to LastFM, a message like this will show up to your browser:
Once you will give access to the application, you can click "Next" again and able to scrobble with Impulse Media Player
* Yellow square: this image indicates that you have successfully scrobbled the track
** Green square: A red LastFM logo indicates you have the lastFM account associated with IMP, otherwise is gray. When track info is taken from lastFM, image blink for a few seconds
Remote Tag Service
Impulse Media Player automatically get info from several network service of what you are listening.This means that even if you are listening to a streaming radio capable to send title and artist tag, info relative to album, album cover and other stuff will be wrapped and displayed on this area.
Even more, it will be possibile to display and share context useful links like Lastfm, Facebook, Twitter, LyricWiki, or Spotify.
Social
Mostly of the social features require a Lastfm or Facebook accounts.Lastfm provide some useful services like search events on your city, scrobbling, getting your last played tracks list. Both lastFM and Facebook allow to share and post objects.
facebook login
search for events
share event
similar tracks
Tag
As shown at the image below:tag display example
yellow circle: copy data from lastfm to file's panel
green circle: open, delete or export image cover panel
red circle: tag file with data shown on the panel
↧
↧
Created Release: Impulse Media Player 3.5.0.0 (Jul 10, 2013)
- tag support with Ultimate Music Tagger (see [url:homepage|http://umtagger.codeplex.com for details)
- changed display view for similar tracks
- wave spectrum analyzer moved on top of the main display
- play button on tracklist tab display will now play focused track
- Lastfm track wiki display information improved
- other fixes
↧
Released: Impulse Media Player 3.5.0.0 (Jul 10, 2013)
- tag support with Ultimate Music Tagger (see [url:homepage|http://umtagger.codeplex.com for details)
- changed display view for similar tracks
- wave spectrum analyzer moved on top of the main display
- play button on tracklist tab display will now play focused track
- Lastfm track wiki display information improved
- other fixes
↧
Updated Release: Impulse Media Player 3.5.0.0 (Jul 10, 2013)
- tag support with Ultimate Music Tagger (see [url:homepage|http://umtagger.codeplex.com for details)
- changed display view for similar tracks
- wave spectrum analyzer moved on top of the main display
- play button on tracklist tab display will now play focused track
- Lastfm track wiki display information improved
- other fixes
↧
↧
Released: Impulse Media Player 3.5.0.1 (Jul 11, 2013)
- Fixed a crash that occurs when copying data from lastfm to file panel
↧
Created Release: Impulse Media Player 3.5.0.1 (Jul 11, 2013)
- Fixed a crash that occurs when copying data from lastfm to file panel
↧
New Post: Where is the source code?
Codeplex is an Open Source web site, but I don't see links to your source code anywhere.
Please advise.
Please advise.
↧
Updated Wiki: Home
Impulse Media Player Overview
Impulse Media Player is the ultimate media player for WindowsPremise
Rathen than a simple music player, Impulse Media Player might be considered an effective
MUSIC HOME STATION.
When user is not just a simple passive listener
User can search for events, songs, scrobble or share track, look on its history's tracklist and apply useful fx to what is listening.
Features
- Change speed of music without affecting pitch
- Change pitch (in semitones or cents) of music without affecting speed
- BPM Detection
- Loop mode
- Convert local or remote stream with selected speed, pitch and fx to MP3, WMA, WAV format
- Broadcasting feature with Shoutcast or WMACast
- Internet radio streams support
- Playlist management
- Tag file (powered by Ultimate Music Tagger)
- Extreme performance also on slow machines
- Mini controlable Popup window over tasktray that allow user to do any other task in foreground
- Analyze and identify your current listening track with EchoNest Analyzer
- Automatically check for version updates
- Supported files extension: mp3, ogg, wav, mp2, mp1, aiff, m2a, mpa, m1a, mpg, mpeg, aif, mp3pro, bwf, mus, wma, wmv, aac, adts, mp4, m4a, m4b, mod, mo3, s3m, xm, it, mtm, umx, mdz, s3z, itz, xmz, cda, flac, wma, wmv, aac, adts, mp4, m4a, m4b, mpc, mpp, mp+
- Social
- Connection to Last FM services features, included Scrobbling
- Share and search track, event via Lastfm or Facebook
- Context links wrapped from Lastfm, Facebook, Twitter, LyricWiki, or Spotify.
Check the documentation for more info
Requirement
framework .NET 4
Windows 32 / 64 bit
Please notice
Expression themes is strongly encouraged;
use of other themes can cause instability
Contact
fabrizio.stellato<hat>gmail<dot>com
Say thanks to
Ian and Radio42 of un4seen forum
Matt Searles, XAML Guy, Sheldon _Xiao from msdn forum
Links
Bass Audio
External services used
| lastFM | LyricWiki | EchoNest | Spotify | |
 |
|---|
Awards
Softpedia
Findmysoft
Softmazing
soft82.com
Comments:
Softmazing.com editor team:
“Impulse Media Player is a stable, reliable, easy to use Windows application, offering good functionality for your everyday multimedia entertainment.”
Donate
Impulse Media Player is a freeware project that is developed in personal time. You can show your appreciation for Impulse Media Player and support future development by donating.
↧
↧
Updated Wiki: Documentation
Display
Press CTRL + O to Open URL dialogPress CTRL + D to Open folder dialog
Broadcast
With Impulse Media Player you can broadcast your music or record device over the net.To do so, you have two kind of server to choice:
- Windows Media
- Shoutcast
While WMA does not require any additional file, streaming in Shoutcast need two separate softwares.
- lame.exe ( can be downloaded at rarewares )
- a shoutcast server ( check shoutcast.com )
For lame.exe, just put it in the Impulse Media Player root directory.
To set up and run shoutcast server, you can take a look to the getting started guide.
By the way, here's an hint to run a shoutcast server using a simple configuration.
- Go inside Shoutcast program directory, open the scservsimple.conf file
go to the line
publicserver=always, comment using ; token and replace with
publicserver=never
add the following line:
portbase=8005.
since default port is often busy , using this port you have more chances to connect in.
Once you have updated the conf file, just run scserv.exe_ as admin and start it using simple configuration.
If you have success, you'll able to connect to shoutcast and spread your music over the network !
Broadcast with shoutcast
shoutcast web panel
Scrobbling
Scrobbling a track means you are sending to LastFM the info about the song you are listening.For more info, you can read the official FAQ page
This is a social feature that also allow you to know people which same music's interest.
To scrobble a track you need to register an account to LastFM and then give to Impulse Media Player the right permission.
To do so , open the preferences dialog, go to LastFM section and follow the simple steps indicated by the display. By clicking "Next button", once you are logged to LastFM, a message like this will show up to your browser:
Once you will give access to the application, you can click "Next" again and able to scrobble with Impulse Media Player
* Yellow square: this image indicates that you have successfully scrobbled the track
** Green square: A red LastFM logo indicates you have the lastFM account associated with IMP, otherwise is gray. When track info is taken from lastFM, image blink for a few seconds
Remote Tag Service
Impulse Media Player automatically get info from several network service of what you are listening.This means that even if you are listening to a streaming radio capable to send title and artist tag, info relative to album, album cover and other stuff will be wrapped and displayed on this area.
Even more, it will be possibile to display and share context useful links like Lastfm, Facebook, Twitter, LyricWiki, or Spotify.
an image of the Michael Jackson's song "Don't stop 'til you get enough" included of wiki information
Social
Mostly of the social features require a Lastfm or Facebook accounts.Lastfm provide some useful services like search events on your city, scrobbling, getting your last played tracks list. Both lastFM and Facebook allow to share and post objects.
facebook login
search for events
share event
similar tracks
Tag
As shown at the image below:tag display example
yellow circle: copy data from lastfm to file's panel
green circle: open, delete or export image cover panel
red circle: tag file with data shown on the panel
↧
New Post: New feature to store/recall pitch/speed settings for songs OR new semitone slider that adjusts in clear audible steps
Zenon66, thanks for this! I upgraded from Pitch & Shift due to the inclusion of the ability to adjust cents.
I'm extremely grateful for this tool! I studied interface design in school, and I understand the challenges. My constructive criticism is that I'd really like to see the values for semitone, cent, etc. Viewing those values only on hover is kind of a pain. Other buttons have no explanation at all and it would be useful for those to at least have something on hover so you know what the buttons do. I had to use trial and error to figure them out.
That's just constructive criticism. I'm very happy with this program overall and I appreciate your responsiveness above in this thread.
Cheers!
I'm extremely grateful for this tool! I studied interface design in school, and I understand the challenges. My constructive criticism is that I'd really like to see the values for semitone, cent, etc. Viewing those values only on hover is kind of a pain. Other buttons have no explanation at all and it would be useful for those to at least have something on hover so you know what the buttons do. I had to use trial and error to figure them out.
That's just constructive criticism. I'm very happy with this program overall and I appreciate your responsiveness above in this thread.
Cheers!
↧
New Post: New feature to store/recall pitch/speed settings for songs OR new semitone slider that adjusts in clear audible steps
Hi jc174.
Actually I see that some buttons should need a tooltip to explain its function.
In the other hand, having a value for pitch/shift fixed on the interface might result on make the UI more ugly.
BTW, for the next version I'll try to achieve a more legible UI, even for the mixer value.
Also about the mixer, a good idea might be to let choose from a preset of values; I'm looking for a valid and source but so far I didn't find any.
Actually I'm already busy on Ultimate Music Tagger for a great refactoring / improvement job.
Stay tuned anyway :)
Best regards
FS
Actually I see that some buttons should need a tooltip to explain its function.
In the other hand, having a value for pitch/shift fixed on the interface might result on make the UI more ugly.
BTW, for the next version I'll try to achieve a more legible UI, even for the mixer value.
Also about the mixer, a good idea might be to let choose from a preset of values; I'm looking for a valid and source but so far I didn't find any.
Actually I'm already busy on Ultimate Music Tagger for a great refactoring / improvement job.
Stay tuned anyway :)
Best regards
FS
↧
Updated Wiki: Home
Impulse Media Player Overview
Impulse Media Player is the ultimate media player for WindowsPremise
Rathen than a simple music player, Impulse Media Player might be considered an effective
MUSIC HOME STATION.
When user is not just a simple passive listener
User can search for events, songs, scrobble or share track, look on its history's tracklist and apply useful fx to what is listening.
Features
- Change speed of music without affecting pitch
- Change pitch (in semitones or cents) of music without affecting speed
- BPM Detection
- Loop mode
- Convert local or remote stream with selected speed, pitch and fx to MP3, WMA, WAV format
- Broadcasting feature with Shoutcast or WMACast
- Internet radio streams support
- Playlist management
- Tag file (powered by Ultimate Music Tagger)
- Extreme performance also on slow machines
- Mini controlable Popup window over tasktray that allow user to do any other task in foreground
- Analyze and identify your current listening track with EchoNest Analyzer
- Automatically check for version updates
- Supported files extension: mp3, ogg, wav, mp2, mp1, aiff, m2a, mpa, m1a, mpg, mpeg, aif, mp3pro, bwf, mus, wma, wmv, aac, adts, mp4, m4a, m4b, mod, mo3, s3m, xm, it, mtm, umx, mdz, s3z, itz, xmz, cda, flac, wma, wmv, aac, adts, mp4, m4a, m4b, mpc, mpp, mp+
- Social
- Connection to Last FM services features, included Scrobbling
- Share and search track, event via Lastfm or Facebook
- Context links wrapped from Lastfm, Facebook, Twitter, LyricWiki, or Spotify.
Check the documentation for more info
Requirement
framework .NET 4
Windows 32 / 64 bit
Please notice
Expression themes is strongly encouraged;
use of other themes can cause instability
Contact
fabrizio.stellato<hat>gmail<dot>com
Say thanks to
Ian and Radio42 of un4seen forum
Matt Searles, XAML Guy, Sheldon _Xiao from msdn forum
Links
Bass Audio
External services
| lastFM | LyricWiki | EchoNest | Spotify | |
|
|---|
Awards
Softpedia
Findmysoft
Softmazing
soft82.com
Comments:
Softmazing.com editor team:
“Impulse Media Player is a stable, reliable, easy to use Windows application, offering good functionality for your everyday multimedia entertainment.”
Donate
Impulse Media Player is a freeware project that is developed in personal time. You can show your appreciation for Impulse Media Player and support future development by donating.
↧
↧
Created Release: Impulse Media Player 3.5.0.2 (Sep 17, 2013)
- Splash screen added
↧
Updated Release: Impulse Media Player 3.5.0.2 (Sep 17, 2013)
- Splash screen added.
It helps to figure out when the program is loading or not
↧
Released: Impulse Media Player 3.5.0.2 (Sep 17, 2013)
- Splash screen added. It helps to figure out when the program is loading or not
↧
Updated Release: Impulse Media Player 3.5.0.2 (Sep 17, 2013)
- Splash screen added. It helps to figure out when the program is loading or not
↧
↧
Updated Wiki: Home
Impulse Media Player Overview
Impulse Media Player is the ultimate media player for WindowsPremise
Rathen than a simple music player, Impulse Media Player might be considered an effective
MUSIC HOME STATION.
When user is not just a simple passive listener
User can search for events, songs, scrobble or share track, look on its history's tracklist and apply useful fx to what is listening.
Features
- Change speed of music without affecting pitch
- Change pitch (in semitones or cents) of music without affecting speed
- BPM Detection
- Loop mode
- Convert local or remote stream with selected speed, pitch and fx to MP3, WMA, WAV format
- Broadcasting feature with Shoutcast or WMACast
- Internet radio streams support
- Playlist management
- Tag file (powered by Ultimate Music Tagger)
- Extreme performance also on slow machines
- Mini controlable Popup window over tasktray that allow user to do any other task in foreground
- Analyze and identify your current listening track with EchoNest Analyzer
- Automatically check for version updates
- Supported files extension: mp3, ogg, wav, mp2, mp1, aiff, m2a, mpa, m1a, mpg, mpeg, aif, mp3pro, bwf, mus, wma, wmv, aac, adts, mp4, m4a, m4b, mod, mo3, s3m, xm, it, mtm, umx, mdz, s3z, itz, xmz, cda, flac, wma, wmv, aac, adts, mp4, m4a, m4b, mpc, mpp, mp+
- Social
- Connection to Last FM services features, included Scrobbling
- Share and search track, event via Lastfm or Facebook
- Context links wrapped from Lastfm, Facebook, Twitter, LyricWiki, or Spotify.
Check the documentation for more info
Requirement
framework .NET 4
Windows 32 / 64 bit
Please notice
Expression themes is strongly encouraged;
use of other themes can cause instability
Contact
fabrizio<dot>stellato<hat>gmail<dot>com
Say thanks to
Ian and Radio42 of un4seen forum
Matt Searles, XAML Guy, Sheldon _Xiao from msdn forum
Links
Bass Audio
External services
| lastFM | LyricWiki | EchoNest | Spotify | |
|
|---|
Awards
Softpedia
Findmysoft
Softmazing
soft82.com
Comments:
Softmazing.com editor team:
“Impulse Media Player is a stable, reliable, easy to use Windows application, offering good functionality for your everyday multimedia entertainment.”
Donate
Impulse Media Player is a freeware project that is developed in personal time. You can show your appreciation for Impulse Media Player and support future development by donating.
↧
Reviewed: Impulse Media Player 3.5.0.2 (十一月 28, 2013)
Rated 4 Stars (out of 5) - ADD A chinese LANGEUAGE
↧
Updated Wiki: Documentation
Display
Press CTRL + O to Open URL dialogPress CTRL + D to Open folder dialog
Broadcast
With Impulse Media Player you can broadcast your music or record device over the net.To do so, you have two kind of server to choice:
- Windows Media
- Shoutcast
While WMA does not require any additional file, streaming in Shoutcast need two separate softwares.
- lame.exe ( can be downloaded at rarewares )
- a shoutcast server ( check shoutcast.com )
For lame.exe, just put it in the Impulse Media Player root directory.
To set up and run shoutcast server, you can take a look to the getting started guide.
By the way, here's an hint to run a shoutcast server using a simple configuration.
- Go inside Shoutcast program directory, open the scservsimple.conf file
go to the line
publicserver=always, comment using ; token and replace with
publicserver=never
add the following line:
portbase=8005.
since default port is often busy , using this port you have more chances to connect in.
Once you have updated the conf file, just run scserv.exe_ as admin and start it using simple configuration.
If you have success, you'll able to connect to shoutcast and spread your music over the network !
Broadcast with shoutcast
shoutcast web panel
Scrobbling
Scrobbling a track means you are sending to LastFM the info about the song you are listening.For more info, you can read the official FAQ page
This is a social feature that also allow you to know people which same music's interest.
To scrobble a track you need to register an account to LastFM and then give to Impulse Media Player the right permission.
To do so , open the preferences dialog, go to LastFM section and follow the simple steps indicated by the display. By clicking "Next button", once you are logged to LastFM, a message like this will show up to your browser:
Once you will give access to the application, you can click "Next" again and able to scrobble with Impulse Media Player
* Yellow square: this image indicates that you have successfully scrobbled the track
** Green square: A red LastFM logo indicates you have the lastFM account associated with IMP, otherwise is gray. When track info is taken from lastFM, image blink for a few seconds
Remote Tag Service
Impulse Media Player automatically get info from several network service of what you are listening.This means that even if you are listening to a streaming radio capable to send title and artist tag, info relative to album, album cover and other stuff will be wrapped and displayed on this area.
Even more, it will be possibile to display and share context useful links like Lastfm, Facebook, Twitter, LyricWiki, or Spotify.
an image of the Michael Jackson's song "Don't stop 'til you get enough" included of wiki information
Social
Mostly of the social features require a Lastfm or Facebook accounts.Lastfm provide some useful services like search events on your city, scrobbling, getting your last played tracks list. Both lastFM and Facebook allow to share and post objects.
facebook login
search for events
share event
similar tracks
Tag
As shown at the image below:tag display example
yellow circle: copy data from lastfm to file's panel
green circle: open, delete or export image cover panel
red circle: tag file with data shown on the panel
↧